| SP125 Limited | |
|
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England |
|
|
Telephone 01274 583231 steve@sp125racing.com Mobile 07738 626165 |
|
|
Gear Change Lights RS125 / RS250 Honda |
|
| Gear Change Light for standard Honda RS125 / RS250 | |
|
Overview |
|
|
A Red and Green ‘change gear now’ indicator with 16 rpm settings selected by a switch. |
|
|
Units with different ranges of RPM are available to suit different fuels or riders etc, |
|
| each has 16 settings in 100RPM steps. | |
|
Operation |
|
|
On the RPM rising above the RPM point selected the Cluster is illuminated, |
|
|
as the RPM falls 100 rpm below the set point the Cluster will extinguish |
|
|
|
|
|
Connections |
|
|
In the noise cone to the tachometer wiring: |
|
|
Green to taco green |
|
|
Blue to taco blue |
|
|
Black to taco black |
|
|
Mount the Cluster in the dashboard foam, the rear of the cluster has a M3 threaded hole, |
|
|
the control unit has a self adhesive Velcro pad to allow mounting to the CDi unit. |
|
|
Range Selection |
|
|
See tables below and specify range on ordering, if a different range or rpm step is required please ask. |
|
|
Specifications: |
|
|
Voltage range |
11V to 18V |
|
Input Current illuminated |
50mA nominal, 100mA max |
|
Input Current not illuminated |
2mA nominal, 10mA max |
|
Viewing angle |
40 degrees |
|
Brightness |
2000 - 4000 mcd |
|
Temperature range |
-10degC to +60degC |
|
Weight |
Approx 80g |
|
RPM step size |
100RPM |
|
RPM Hysteresis |
100RPM |
|
|
|
|
|
|
|
|
|
| RS125 / RS250 Honda Gear Change Light : £100.00 + VAT (adjustable between 12,500 ~ 14,000 rpm) | |
| RS125 / RS250 Honda Gear Change Light : £100.00 + VAT (adjustable between 12,000 ~ 13,500 rpm) | |
| RS125 / RS250 Honda Gear Change Light : £100.00 + VAT (adjustable between 11,500 ~ 13,000 rpm) | |
|
The change light has a 1,500rpm range and it can be made to order, to light at any rpm in this 1,500rpm range |
|
| Gear Change Light for BPS / AIM / HRC Honda Datalogger RS125 / RS250 | |
|
To replace any change light indicators on existing systems with a super bright cluster, fit to BPS, aim, Honda etc |
|
|
|
|
|
For increased indicator effect - Super Bright Change Light |
|
|
Red Wire : Supply Voltage (10V to 18V) |
|
|
Green Wire : 0V (chassis) |
|
|
White Wire : Input signal |
|
|
(less than 1 Volt no illumination, larger than 2 Volts = illuminated) |
|
|
Supply current 200mA max, 100mA nominal, input signal requirement less than 1mA |
|
|
Wiring to the BPS change indicator |
|
|
Cut and strip back the indicator cable. |
|
|
Remove the red indicator led |
|
|
Connect to the dashboard wires : |
|
|
Black on the BPS to green on the Cluster |
|
|
Red on the BPS to white on the Cluster |
|
|
Red on the Cluster unit to a positive supply ( Black on the Honda loom ) |
|
| Gear Change Light for BPS / AIM / HRC Honda Datalogger RS125 / RS250 : £50.00 + VAT | |
|
Exports of all parts supplied to outside EC Countries are exempt from UK VAT Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied |
|
| CALL STEVE PATRICKSON | |
| 01274 583231 or 07738 626165 | |
| OR SEND YOUR E-MAIL TO | |
| steve@sp125racing.com | |
|
|
|
|
SP125 Limited Disclaimer Honda, HRC
and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events. All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable. |
|
