| SP125 Limited | ||
|
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England |
||
|
Telephone 01274 583231 steve@sp125racing.com Mobile 07738 626165 |
||
| www.sp125racing.com | ||
| RS125 LUYTEN KIT | ||
| Please 'Refresh' this page every time you visit. | ||
| If it is slow to reload, you know then that this page has been updated since your last visit. | ||
| Below are pictures of the Luyten Kit for the Honda RS125 1998 to 2007 | ||
| Included with the kit are the following parts: | ||
| 1 x Kit Cylinder | ||
| 3 x Kit Cylinder Heads (11.4cc / 11.6cc / 11.8cc) | ||
| 1 x Kit Exhaust Chamber | ||
| 1 x Kit Exhaust Silencer | ||
| 1 x Kit Exhaust Flange with O-Rings | ||
| 2 x Cylinder Head O-Rings | ||
| 6 x Cylinder Head Studs & Head Nuts | ||
| This Kit is a big improvement over the standard items and much easier to make good settings compared to powervalve kits. | ||
| This kit is designed for use with either unleaded or leaded race fuel. | ||
| It is better to use the HRC programmable or BPS programmable ignition, of which a curve will be supplied to match the kit. | ||
| But the kit can also be used together with a standard ignition CDI and used together with an Ignition Curve Changer. | ||
| Go To: Ignition Curve Changer | ||
| For more information and price please contact Steve Patrickson | ||
| Telephone: From within UK : 01274 592035 | ||
| Telephone: From outside UK : +44 1274 592035 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Exports of all parts supplied to outside EC Countries are exempt from UK VAT Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied |
||
|
|
||
|
SP125 Limited Disclaimer Honda, HRC
and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events. All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable. |
||