SP125 Limited

22 Walker Wood,  Baildon,  Shipley,  West Yorkshire,  BD17 5BE,  England

Telephone 01274 583231      steve@sp125racing.com      Mobile 07738 626165
 
www.sp125racing.com
 
RS125 NEW HANDLEBARS, LEVERS & FOOTPEGS
 
Please  'Refresh' this page every time you visit.
If it is slow to reload, you know then that this page has been updated since your last visit.
 
 

HANDLEBARS & LEVERS
 
  1995~2010 22mm FORWARD EXTENDED HANDLEBAR CLAMPS - Pair £155.00 + VAT
   
 
   
  1988~2010 PATTERN ALUMINIUM HANDLEBAR - with nylon end cap £16.00 + VAT each
 
 
  1988~2010 PATTERN SOLID NYLON HANDLEBAR END CAP £2.50 + VAT
 
 
  BREMBO BRAKE LEVER - Standard 250 length £33.50 + VAT
  BREMBO BRAKE LEVER - Short 125 length £35.50 + VAT

  

Top: Brembo Short 18 Front Brake Lever 

 

Bottom: Brembo Standard Front Brake Lever 

 
  BREMBO 'FOLDING' BILLET BRAKE LEVER - Standard 250 length £95.00 + VAT
 

 
  1988~2010 PATTERN CLUTCH LEVER £16.00 + VAT
 

 
 

FOOTPEG HANGERS, PEGS, GEAR & REAR BRAKE LEVERS
 
  1995~2010 RCD GP PATTERN FOOTPEG (Threaded fixing) with Nylon End Cap £15.50 + VAT each
 

 
  1995~2010 RCD PATTERN FOOTREST HANGER PLATE - Stronger & Lighter Than Standard - CNC Machined £35.00 + VAT each
 
  1995~2010 RCD COMPLETE ASSEMBLED FOOTREST HANGER KIT - Per Side £95.00 + VAT
 
  1990~2010 RCD PATTERN GEAR LEVER - 20% Lighter than standard £47.00 + VAT
  1990~2010 RCD PATTERN REAR BRAKE LEVER - 20% lighter than standard £47.00 + VAT
 

 

  
 
  1995~2010 PATTERN FOOTREST HANGER PLATE +50mm EXTENDED - Stronger & Longer Than Standard £60.00 + VAT each
  1990~2010 PATTERN GEARCHANGE ROD +50mm EXTENDED £15.00 + VAT each
 

50mm Extended Footrest Hangers
 
 

  GP BEARING TYPE GEAR & REAR BRAKE LEVERS
   
  If you're running a Quickshifter, these are a 'must have' item - saves having to adjuster the shifter every 2 minutes !  

 

  
  1995~2010 BATTLE FACTORY FOOTREST HANGER SET - Footpeg Position Standard £280.00 + VAT
  1995~2010 BATTLE FACTORY FOOTREST HANGER SET - Footpeg Position Up 15mm £280.00 + VAT
   

   
 
  1995~2010 BATTLE FACTORY FOOTREST HANGER - Footpeg Position Standard £55.00 + VAT each
  1995~2010 BATTLE FACTORY FOOTREST HANGER - Footpeg Position Up 15mm £55.00 + VAT each
   

   
   
  1990~2010 BATTLE FACTORY G.P. SPEC BEARING TYPE GEAR LEVER - Increased Leverage & No Side Play £67.50 + VAT
  1990~2010 BATTLE FACTORY G.P. SPEC BEARING TYPE REAR BRAKE LEVER - No Side Play £67.50 + VAT
   

 

   
   
  1990~2010 BATTLE FACTORY FOOTPEG (Threaded fixing) with Nylon End Cap & Stud for GP Bearing Lever £19.50 + VAT each
   

   
   
  1990~2010 BATTLE FACTORY Replacement Lever End £18.75 + VAT
   

   
  1990~2010 BATTLE FACTORY Replacement Lever Bearing (x2 in each lever) £10.75 + VAT each
   

   
  1990~2010 BATTLE FACTORY Replacement Lever Aluminium Collar (28x2.5x2) for pack of x2 £5.00 + VAT
   

   
  1990~2010 BATTLE FACTORY Replacement Lever Shim Washer (8x0.5x4) for pack of x4 £1.00 + VAT
   

   
   

Exports of all parts supplied to outside EC Countries are exempt from UK VAT

Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied
 
 
 

Return To sp125racing.com Homepage

  
 
 

 
 

SP125 Limited Disclaimer

Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.

All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.