| SP125 Limited | |
|
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England |
|
|
Telephone 01274 583231 steve@sp125racing.com Mobile 07738 626165 |
|
| www.sp125racing.com | |
| RS125 BRAKES, DISCS & PADS | |
| Please 'Refresh' this page every time you visit. | |
| If it is slow to reload, you know then that this page has been updated since your last visit. | |
|
BRAKES, DISCS & PADS |
|
| EBC REAR BRAKE PADS (Pair) | |
| £16.00 + VAT | |
| STAINLESS STEEL LIGHTWEIGHT REAR BRAKE DISC | |
| £49.00 + VAT | |
|
|
|
| BRAKING STEEL 'WAVE' REAR BRAKE DISC - As used by Ueda & Cecchinello in 2000 GP's | |
| £80.00 + VAT | |
|
|
|
|
BREMBO BRAKES |
|
|
|
|
| BREMBO 16x18 RADIAL FRONT BRAKE MASTERCYLINDER - including Brake Lever - 16mm bore, 18-ratio lever, 286g | |
| £195.00 + VAT | |
|
|
|
| If you've ever suffered any problems with the front brake - bets are you're standard mastercylinder is shot | |
| BREMBO FRONT BRAKE MASTERCYLINDER REPAIR KIT | |
| Genuine Brembo Mastercylinder repair kit - to repair damaged push rod and crush washer | |
| £32.50 + VAT | |
|
|
|
| Brembo 16x18 Front Brake Mastercylinder Remote Brake Fluid Reservoir Kit | |
| Reservoir, Neoprene Hose, 2x Hose Clips, Banjo Bolt & 2x Copper Washers | |
| £22.00 + VAT | |
|
|
|
| BREMBO RESERVOIR - standard size | |
| £8.00 + VAT | |
|
|
|
| BREMBO RESERVOIR - small size with straight outlet | |
| £7.50 + VAT | |
|
|
|
| BREMBO RESERVOIR - small size with 45 degree outlet | |
| £7.50 + VAT | |
|
|
|
| BREMBO 16x18 REMOTE BRAKE ADJUSTER | |
| The remote adjuster has become an integral part of all racing brake systems. | |
| One end is attached to the brake lever span adjuster, the other end is mounted on the opposite side of the handle bar, | |
| and this enables the rider to adjust the lever span while keeping control of the throttle. | |
| Probably used by every team and rider that runs a racing brake system. | |
| Primarily designed for use with Brembo racing cylinders but can also be adapted for use with any brake cylinder that features lever span adjustment. | |
| BREMBO Straight Remote Brake Lever Adjuster - 565mm long | |
| BREMBO Straight Remote Brake Lever Adjuster - 625mm long | |
| BREMBO Straight Remote Brake Lever Adjuster - 715mm long (Most Popular Length) | |
| £90.00 + VAT | |
| BREMBO Inlet adaptor for master cylinders straight out | |
| £3.50 + VAT | |
| BREMBO Roll pin for racing cylinders to fix pushrod knob | |
| £0.50 + VAT | |
|
THESE REMOTE ADJUSTERS DO NOT INCLUDE THE HANDLE BAR CLAMP, WHICH IS NOT CURRENTLY MADE BY BREMBO |
|
|
|
|
| Brembo replacement Brake Levers | |
| Brembo 'Short' 18 Front Brake Lever | |
| £39.00 + VAT | |
| Brembo 'Standard' Front Brake Lever | |
| £31.50 + VAT | |
![]() |
|
| BREMBO 'FOLDING' BILLET BRAKE LEVER - Standard 250 length | |
| £92.00 + VAT | |
| BREMBO 'FOLDING' BILLET BRAKE LEVER - Short 18 length | |
| £95.00 + VAT | |
|
|
|
| Brembo Lever PIVOT PIN | |
| £2.25 + VAT | |
|
|
|
| Brembo Lever Pivot Pin RETAINING CLIP | |
| £0.55 + VAT | |
|
|
|
| Brembo Lever BARREL NUT | |
| £31.00 + VAT | |
|
|
|
| Brembo Lever KNURLED ADJUSTER KNOB | |
| £9.00 + VAT | |
|
|
|
| Brembo LCF600 DOT4 BRAKE FLUID (500ml) | |
| £22.50 + VAT | |
|
|
|
| Brembo Bleed nipple kit - bleed nipple and bleed nipple cover | |
| £5.75 + VAT | |
|
|
|
| Brembo Banjo Bolt - With Brake Light Switch - for single banjo Brembo MasterCylinders | |
| £12.00 + VAT | |
|
|
|
| Brembo Banjo Bolt - With Brake Light Switch - for double banjo Brembo MasterCylinders | |
| £15.50 + VAT | |
|
|
|
![]() |
|
| BREMBO 290mm FRONT BRAKE DISC - Fully Floating, Drilled Cast Stainless Steel Rotor with machined Aluminium Center | |
| £310.00 + VAT | |
|
|
|
| BREMBO STANDARD 45100-NX4-770 GOLDLINE FRONT BRAKE CALIPER | |
| For use only with standard 297mm front brake disc | |
| Standard Cast Aluminium 2-Piece Body with 30/34 Aluminium 4 Pot with Dust Seals | |
| £165.00 + VAT | |
| BREMBO BILLET 2-PIECE FRONT BRAKE CALIPER - for use only with standard 297mm front brake disc | |
| 2-Piece Body Machined from Solid Aluminium, with 30/34 Titanium 4 Piston, with Racing Spec Seals & Quick Release Pad Pin. | |
| 40mm mounting hole centres. Weight 780g | |
| £340.00 + VAT | |
|
|
|
| PAD PIN & R-CLIP for BREMBO BILLET CALIPER | |
| £6.00 + VAT | |
|
|
|
| BREMBO X10.48.14 GP 2-PIECE FRONT BRAKE CALIPER - for use only with brembo 290mm front brake disc | |
| 2-Piece Body Machined from Solid Aluminium with 32/36 Titanium 4 Pot with Racing Spec SealsQuick release Titanium pad pin. | |
| Quick release Titanium pad pin. No pads included. 40mm mounting hole centres. Weight 706g | |
| Larger pistons than Billet, so better braking power. Titanium pistons so less heat transfer. 8mm thick pad. | |
| £695.00 + VAT | |
|
|
|
| PAD PIN for BREMBO GP 2-PIECE CALIPER (20.6964.10) | |
| £35.00 + VAT | |
| R-CLIP for BREMBO GP 2-PIECE CALIPER (05.4542.21) | |
| £3.80 + VAT | |
|
|
|
| BREMBO X10.17.41 MONOBLOC FRONT BRAKE CALIPER - for use only with brembo 290mm front brake disc | |
| 1-Piece Body Machined from Solid Aluminium with 32/36 Titanium 4 Pot with Racing Spec Seals | |
| Quick release Titanium pad pin. No pads included. 40mm mounting hole centres. Weight 780g | |
| It is a true single piece caliper, giving better consistency and braking power. Also 10mm thick pad. | |
| £1,050.00 + VAT | |
|
|
|
| PAD PIN for BREMBO MONOBLOC CALIPER (X10.17.08) | |
| £37.50 + VAT | |
| R-CLIP for BREMBO GP MONOBLOC CALIPER (05.4542.21) | |
| £3.80 + VAT | |
|
|
|
| Brembo Bleed nipple kit for MONOBLOC CALIPER - bleed nipple and bleed nipple cover | |
| £5.75 + VAT | |
|
|
|
| BREMBO XA3 RADIAL 2-PIECE FRONT BRAKE CALIPER - for use only with brembo 290mm front brake disc | |
| 2-Piece Body Machined from Solid Aluminium, with Aluminium 4 Piston, with Racing Spec Seals & Quick Release Pad Pin. | |
| £595.00 + VAT | |
| 2-Piece Body Machined from Solid Aluminium, with Titanium 4 Piston & Bolts, with Racing Spec Seals & Quick Release Pad Pin. | |
| £895.00 + VAT | |
| Excellent performance upgrade for replacing standard calipers at a lower price than Monobloc versions. | |
|
|
|
| PAD PIN for BREMBO 2-PIECE RADIAL CALIPER (20.6964.10) | |
| £35.00 + VAT | |
| R-CLIP for BREMBO 2-PIECE RADIAL CALIPER (05.4542.21) | |
| £3.80 + VAT | |
|
|
|
| BREMBO X97 RADIAL MONOBLOC FRONT BRAKE CALIPER (2-Pad) - for use only with brembo 290mm front brake disc | |
| 1-Piece Body Machined from Solid Aluminium with 32/36 Titanium 4 Pot with Racing Spec Seals | |
| Quick release Titanium pad pin. No pads included. Radial Mounted 108mm mounting hole centres. Weight 660g | |
| It is a true single piece caliper + with radial fixing gives further improvements in consistency and braking power. | |
| £1,395.00 + VAT | |
|
|
|
| PAD PIN for BREMBO RADIAL MONOBLOC CALIPER (X10.17.08) | |
| £37.50 + VAT | |
| R-CLIP for BREMBO RADIAL MONOBLOC CALIPER (05.4542.21) | |
| £3.80 + VAT | |
|
|
|
| BREMBO X99 RADIAL MONOBLOC FRONT BRAKE CALIPER (4-Pad) - for use only with brembo 290mm front brake disc | |
| It is a true single piece caliper, using 4 pads per caliper giving higher initial bite, braking power and consistency. | |
| £1595.00 + VAT | |
|
|
|
| PAD PIN for BREMBO 4-PAD RADIAL MONOBLOC CALIPER (X99.C4.03) | |
| £42.00 + VAT | |
| R-CLIP for BREMBO 4-PAD RADIAL MONOBLOC CALIPER (05.4542.17) | |
| £11.00 + VAT | |
| PAD SPRING for BREMBO 4-PAD RADIAL MONOBLOC CALIPER (X99.C4.16) | |
| £32.50 + VAT | |
|
|
|
| BREMBO XA9 RADIAL 2-PIECE FRONT BRAKE CALIPER - NICKEL PLATED - for use only with brembo 290mm front brake disc | |
| 2-Piece Body Machined from Solid Aluminium, with Aluminium 4 Piston, with Racing Spec Seals & Quick Release Pad Pin. | |
| £1,100.00 + VAT | |
|
|
|
| BREMBO XA3.J7.F1 RADIAL MONOBLOC PINLESS FRONT BRAKE CALIPER - NICKEL PLATED - for use only with brembo 290mm front brake disc | |
| 1-Piece Body Machined from Solid Aluminium, with Titanium 4 Piston, with Racing Spec Seals & Pinless Pads. | |
| £2,150.00 + VAT | |
|
|
|
| BOLT & SPACER KIT for fitting BREMBO RADIAL CALIPER to standard 2004/07 honda forks & using BREMBO 290mm DISK. | |
| £25.00 + VAT | |
|
|
|
| BREMBO Z04 8mm Sintered Front Brake Pads - Z04 Compound - for X10.48.14 Brembo GP & Radial XA3 Monobloc Caliper | |
| £49.25 + VAT Each | |
|
|
|
| BREMBO Z04 10mm Sintered Front Brake Pads - Z04 Compound - for 2-Pad X97, X10.41 & XA9 Radial Monobloc Caliper | |
| £43.75 + VAT Each | |
|
|
|
| BREMBO Z04 Sintered Front Brake Pads - Z04 Compound - for X99 4-Pad Radial Monobloc Caliper | |
| £53.75 + VAT Each | |
|
|
|
| BREMBO RACING REAR BRAKE CALIPER | |
| £500.00 + VAT | |
|
|
|
| BREMBO REAR BRAKE CALIPER Brake Pads | |
| £25.00 + VAT Each | |
|
|
|
| PAD PIN for BREMBO REAR BRAKE CALIPER | |
| £10.00 + VAT | |
| PAD SPRING for BREMBO REAR BRAKE CALIPER | |
| £25.00 + VAT | |
|
|
|
| NEVER RUN A RACING CALIPER, OTHER THAN THE BREMBO BILLET CALIPER TYPE, ON THE OLD COST IRON DRILLED DISCS, | |
| BECAUSE THE INSIDE OF THE PAD WILL RUN THROUGH THE CENTRE OF THE HOLES, AND CAUSE THE ROTOR MATERIAL | |
| TO HEAT UP AT DIFFERENT RATES ON EITHER SIDE OF THE HOLE WHICH WILL CREATE CRACKS IN THE BRAKING SURFACE | |
| AND CAN LEAD TO THE DISC COMPLETELY CRACKING. | |
| Exports of all parts supplied to outside EC Countries are exempt from UK VAT | |
| Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied | |
|
|
|
| SP125 Limited Disclaimer | |
| Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events. | |
| As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or team | |
| whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all such claims, | |
| including damage to equipment and/or injury to personnel irrespective of how caused. | |
| All parts remain property of SP125 Limited until paid for in full. | |
| All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable. | |