| SP125 Limited | |
|
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England |
|
|
Telephone 01274 583231 steve@sp125racing.com Mobile 07738 626165 |
|
| www.sp125racing.com | |
| RS125 NEW ACCESSORIES, TUNING & PATTERN PARTS | |
| Please 'Refresh' this page every time you visit. | |
| If it is slow to reload, you know then that this page has been updated since your last visit. | |
|
CRASH PROTECTORS |
|
| 1995~2008 FRONT WHEEL SPINDLE CRASH PROTECTORS - RIGHT SIDE | £10.00 + VAT |
| These crash protectors replace the right side wheel spindle nut or can be fitted to the end spindle thread after the | |
| original spindle nut and prevent a lot of crash damage to the bike, spindle. | |
|
|
|
| 1995~2008 FRONT WHEEL SPINDLE CRASH PROTECTORS - LEFT SIDE | £7.50 + VAT |
|
|
|
|
Only available in black colour |
|
|
|
|
| 1995~2008 FRAME CRASH PROTECTORS - Footrest Hanger Mounted - LEFT & RIGHT SIDE | £48.00 + VAT |
| These crash protectors fit to the footrest hangers and prevent a lot of crash damage to the bike, levers, footpegs & Exhaust. | |
| As tested by our team riders - several times! | |
| End Caps for protectors are removable and can be replaced when damaged | |
| Please note: The crash protectors are designed to be the first point of impact as the bike slides on its side in a crash. | |
| When the bike then hits an object at speed, such as a kerb, generally the crash protector can or will break off. | |
| If they were made so that they could not break, then serious damage could occur to the chassis, as that would absorb the impact. | |
| But as the first point of impact, the crash protectors can help prevent damage to other parts, such as levers, footpegs etc. | |
|
* New Improved Design * |
|
|
|
|
|
|
|
| 1990~2008 PRE-PREG CARBON SWINGARM PROTECTORS (Including Rivets) | |
| A really good product - Saves damage to the swingarm when you crash and smash the hell out of the footpegs ! | |
| Size Small 87mm x 55mm - 1990~2008 PRE-PREG CARBON SWINGARM PROTECTORS (Including Rivets) | £15.00 + VAT |
| Size Large 130mm x 70mm - 1990~2008 PRE-PREG CARBON SWINGARM PROTECTORS (Including Rivets) | £25.00 + VAT |
|
|
|
| 1995~2008 RSV CARBON SWINGARM PROTECTORS - Formed to shape of swingarm for greater protection. | £110.00 + VAT |
 |
|
| Exports of all parts supplied to outside EC Countries are exempt from UK VAT | |
| Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied | |
|
|
|
| SP125 Limited Disclaimer | |
| Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events. | |
| As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or team | |
| whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all such claims, | |
| including damage to equipment and/or injury to personnel irrespective of how caused. | |
| All parts remain property of SP125 Limited until paid for in full. | |
| All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable. | |
