SP125 Limited

22 Walker Wood,  Baildon,  Shipley,  West Yorkshire,  BD17 5BE,  England

Telephone 01274 583231      steve@sp125racing.com      Mobile 07738 626165
 
www.sp125racing.com
 
RS125 WHEELS, CHAINS, TYREWARMERS & STANDS
 
Please  'Refresh' this page every time you visit.
If it is slow to reload, you know then that this page has been updated since your last visit.
 
Prices all in GB Pounds Sterling  (GBP)
 
TYREWARMERS
   
  125cc RCD 17" FULLY INSULATED TYREWARMERS (With Thermostat & LED Warning Lights)
  Each warmer comprises of a silicon insulated heating element contained within a high temperature blanket.
  The inbuilt thermostat maintains an optimum temperature of between 70C and 75C.
  The LED warning light operates with the thermostat.
  240 volt power - either mains or a generator ( 1.2kW or over )
   

  £230.00 + VAT

  
   
   
 
WHEELS
 
 
  MARCHESINI WHEELS
   

 
   
  1995~2011  MARCHESINI 'ESPADA' FORGED ALUMINIUM/MAGNESIUM COMPOSITE FRONT & REAR WHEEL SET
   
  Thanks to Marchesini FEM analysis and special AL/MAG alloy research developed using the Marchesini GP partnership,
  these wheels are designed to give national level riders the same performance advantages as experienced by the worlds top riders.
  Utilising 3 dimensional forging technology has enabled Marchesini to create superb rigidity and strength
  while still achieving a weight reduction compared to Cast Magnesium technology.
   

  Wheel Specifications :

  

  Complete with Race Specification Bearings, Ergal Spacers, Lightweight Disc Carriers.

  All wheels are treated with Marchesini "Ultralight" weight saving paint  (Matt Black)
   

  Delivery Time usually 8 to 10 weeks after date of order.
   

  £1,580.00 + VAT

  
   

  Front Wheel      2.50" x 17"      (Weight 2350g) 

   
   

  Rear Wheel       3.50" x 17"      (Weight 2850g) 

   
   
   
  1995~2011  REPLACEMENT MARCHESINI SPROCKET  CARRIER HUB
   

   

 

  £1300.00 + VAT

  
   
   
  1995~2011  REPLACEMENT MARCHESINI BRAKE DISC CARRIER HUB
   

   

 

  £130.00 + VAT

  
   
   
LOW FRICTION WHEEL BEARINGS
   
  LOW FRICTION WHEEL BEARING - To fit standard Honda wheel bearing size & Larger Marvic Front Wheel bearing
   
  LOW FRICTION STANDARD HONDA / MARVIC 6202 BEARINGS

  £5.75 + VAT

  
   
  LOW FRICTION NEW MARVIC 6004 BEARINGS (Right Side)
  £9.50 + VAT
 
  LOW FRICTION NEW MARVIC 6302 BEARINGS (Left Side)

  £10.25 + VAT

  
   
 
Std Honda Size Marvic Front Size  
   
   
  LOW FRICTION SPROCKET CARRIER BEARINGS

  £13.75 + VAT

  
   
 
   
   
SPROCKET CARRIERS & SPROCKETS
   
  1995/2011 'Quick Change' G.P. SPROCKET CARRIER - Better Chain & Cush Drive Life
  No bolts to take out - Sprocket slides onto carrier pegs - very fast sprocket changes
   

  £140.00 + VAT

  
   
 
   

  1995/2011 'Quick Change'REAR SPROCKETS   (34T~42T)

  

  £20.00 + VAT

  
   

  1995/2011 'Quick Change' REAR SPROCKETS   (43T~46T)

  

  £22.50 + VAT

  
   
   
  1995/2011 RCD GP SPROCKET CARRIER - Better Chain & Cush Drive Life

  £45.00 + VAT

  
   
 
   
   
  1995/2011 TALON G.P. SPROCKET CARRIER - Better Chain & Cush Drive Life

  £44.00 + VAT

  
   
 
   
   
  1995/2011 HONDA RS125 GP SPROCKET CARRIER HOLDING TOOL - Fits both RCD & Talon GP Sprocket Carriers

  £25.00 + VAT

  
   
 
   
   
  TALON FRONT SPROCKETS (14~18 teeth)  

  £20.50 + VAT

  
   
  AFAM FRONT SPROCKETS (14~18 teeth) - With LockWire Holes for sprocket bolt

  £20.50 + VAT

  
   
   
   

  TALON REAR SPROCKETS   (34T~42T)

  

  £19.50 + VAT

  
   

  TALON REAR SPROCKETS   (43T~46T)

  

  £22.00 + VAT

  
   
 
   
   
  RS125 1990~2011 AFAM REAR SPROCKETS (32~34 teeth)  
  £31.50 + VAT  
   
  RS125 1990~2011 AFAM REAR SPROCKETS (35~37 teeth)  
  £33.00 + VAT  
   
  RS125 1990~2011 AFAM REAR SPROCKETS (38~39 teeth)  
  £33.75 + VAT  
   
  RS125 1990~2011 AFAM REAR SPROCKETS (40 teeth)  
  £35.00 + VAT  
   
  RS125 1990~2011 AFAM REAR SPROCKETS (41~43 teeth)  
  £36.00 + VAT  
   
 
   
   
CHAINS
   
   
  AFAM 415 (128 link) RACING CHAIN  
  £77.50 + VAT  
   
   
   
FRONT & REAR STANDS
 
 
  RS125 1989~2011 BATTLEFACTORY FRONT WHEEL STAND - (Stainless Steel)
  £120.00 + VAT  

 
 
  RS125 1995~2011 BATTLEFACTORY REAR WHEEL STAND - swingarm mounting (Stainless Steel)
  £145.00 + VAT  
   

 
 
  RS125 BATTLEFACTORY SWINGARM 8mm MOUNTING SPOOLS
  £25.00 + VAT  
   

 
 
  RS125 1990~2011 BATTLEFACTORY FOOTPEG SIDE STAND
  £38.50 + VAT  
   

 
 
  RS125 1989~2011 BATTLEFACTORY WHEEL BALANCING STAND - folding (Stainless Steel)
  £165.00 + VAT  
   

 
 
  Exports of all parts supplied to outside EC Countries are exempt from UK VAT
  Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied
 
 

Return To sp125racing.com Homepage

  
 
 

 
 
 
  SP125 Limited Disclaimer
  Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
  whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all such claims,
  including damage to equipment and/or injury to personnel irrespective of how caused.
  All parts remain property of SP125 Limited until paid for in full.
  All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.