SP125 Limited

22 Walker Wood,  Baildon,  Shipley,  West Yorkshire,  BD17 5BE,  England

Telephone 01274 583231      steve@sp125racing.com      Mobile 07738 626165

 
www.sp125racing.com
 
RS250 NEW CHASSIS ACCESSORIES & PATTERN PARTS
 
Please  'Refresh' this page every time you visit.
If it is slow to reload, you know then that this page has been updated since your last visit.
 

  AIRBOX FOAM
  sp125racing REPLACEMENT AIRBOX FOAM STRIPS - Genuine Japanese Foam
  Size: Length 2000mm x 20mm Wide x 10mm Thick
   £19.50 + VAT  

  
   
  sp125racing REPLACEMENT AIRBOX FOAM STRIPS - UK made Foam
  Size: Length 2000mm x 20mm Wide x 13mm Thick
   £17.50 + VAT  

 
   

  WHEELS

  Wheels no longer available for RS250 Honda.
 
 

  BRAKES

  EBC REAR BRAKE PADS (Pair)
   £16.00 + VAT
 

  SPROCKETS & CHAINS

  TALON FRONT ENGINE SPROCKETS (15~17 teeth) for RS250 1993~2000
   £16.00 + VAT
 
  TALON REAR SPROCKETS (34~41 teeth) for RS250 1993~2000 - Special Sizes Can Be Made To Order

   £20.00 + VAT
   
 
  AFAM FRONT ENGINE SPROCKETS (15T~16T)  for  RS250 1990~1992
   £25.50 + VAT
  AFAM FRONT ENGINE SPROCKETS (15T~18T)  for  RS250 1993~2008
   £25.50 + VAT
 
  AFAM REAR WHEEL SPROCKETS (42T)  for  RS250 1990~1992
   £40.50 + VAT
 
  AFAM REAR WHEEL SPROCKETS (31T~34T)  for  RS250 1993~2000
   £38.50 + VAT
  AFAM REAR WHEEL SPROCKETS (35T~37T)  for  RS250 1993~2000
   £40.00 + VAT
  AFAM REAR WHEEL SPROCKETS (38T~41T)  for  RS250 1993~2000
   £42.50 + VAT
  AFAM REAR WHEEL SPROCKETS (34T~37T)  for  RS250 2001~2008
   £85.00 + VAT
  AFAM REAR WHEEL SPROCKETS (38T~39T)  for  RS250 2001~2008

   £88.50 + VAT
  AFAM REAR WHEEL SPROCKETS (40T~41T)  for  RS250 2001~2008
   £91.00 + VAT
 

 

 
  AFAM 520XRR-118 Xs-ring RACING CHAIN - 118 Links
   £82.50 + VAT
  AFAM 520XRR-120 Xs-ring RACING CHAIN - 120 Links
   £82.50 + VAT
  AFAM 520XSR-G-118 Xs-ring RACING CHAIN - 118 Links - Highest Performance AFAM Chain
   £112.50 + VAT
  AFAM 520XSR-G-118 Xs-ring RACING CHAIN - 120 Links - Highest Performance AFAM Chain
   £117.50 + VAT
 

 

 
 

  HANDLEBARS & LEVERS

  1988~2008 PATTERN ALUMINIUM HANDLEBAR - with nylon end cap

   £16.50 + VAT
 
 
  1988~2008 PATTERN SOLID NYLON HANDLEBAR END CAP

   £2.50 + VAT
 
 
   
   
 
   
  BREMBO 19x18 FRONT BRAKE MASTERCYLINDER - including Brake Lever - 19mm bore, 18-ratio lever.
   £195.00 + VAT  
   
  BREMBO 19x20 FRONT BRAKE MASTERCYLINDER - including Brake Lever - 19mm bore, 20-ratio lever
   £195.00 + VAT  
   
  We offer two different types for twin front calipers.
  Both have a 19mm bore, but one comes with an 18 ratio lever fitted, the other comes with a 20 ratio lever fitted.
  20 ratio gives the hardest feel, but is the hardest to pull.
   
  Brembo 'Standard' Front Brake Lever 
   £35.50 + VAT  
  Brembo 'Short' 18 Front Brake Lever
   £39.00 + VAT  

  
   
  BREMBO 'FOLDING' BILLET BRAKE LEVER - Standard 250 length
   £92.00 + VAT  

  
   

  CHASSIS PARTS

  1995~2008 VHM LIGHTWEIGHT ALLOY ENGINE BUSH SET

   £52.50 + VAT

  
 
   
   

  FOOTPEG HANGERS, PEGS, GEAR & REAR BRAKE LEVERS

 
  PATTERN FOOTPEG (Threaded fixing) with Nylon End Cap

   £15.50 + VAT
 
  1993~2000 PATTERN FOOTREST PLATES - Stronger & Lighter Than Standard
   £34.00 + VAT
  2001~2008 PATTERN FOOTREST PLATES - Stronger & Lighter Than Standard

   £34.00 + VAT
 
   
  1993~2000 BATTLEFACTORY FOOTREST HANGER SET
   £310.00 + VAT  
  2001~2009 BATTLEFACTORY FOOTREST HANGER SET
   £310.00 + VAT  

   
 
  1993~2000 BATTLEFACTORY FOOTREST HANGER - Footpeg Position Standard
   £65.00 + VAT  
  2001~2009 BATTLEFACTORY FOOTREST HANGER - Footpeg Position Standard
   £65.00 + VAT  
   

 

2001~2009 Battle Factory Footrest Hangers shown in above

  
   
   
  1990~2009 BATTLE FACTORY G.P. SPEC BEARING TYPE REAR BRAKE LEVER - Increased Leverage & No Side Play
   £72.50 + VAT  

   
   
  1993~2000 & 2001~2009 BATTLE FACTORY G.P. SPEC BEARING TYPE REAR BRAKE LEVERS - No Side Play
   £72.50 + VAT  
          

                   1993~2000 Gear Lever             

       2001~2008 Gear Lever

  
   
  If you're running a Quickshifter, these are a 'must have' item - saves having to adjuster the shifter every 2 minutes !
   
   
   
   
  1990~2009 BATTLE FACTORY FOOTPEG (Threaded fixing) with Nylon End Cap & Stud for GP Bearing Lever
   £22.50 + VAT  

   
  1990~2009 BATTLE FACTORY Replacement Lever End
   £21.00 + VAT  

   
  1990~2009 BATTLE FACTORY Replacement Lever Bearing (x2 in each lever)
   £12.00 + VAT each  

   
  1990~2009 BATTLE FACTORY Replacement Lever Aluminium Collar (28x2.5x2) for pack of x2
   £5.75 + VAT  

   
  1990~2009 BATTLE FACTORY Replacement Lever Shim Washer (8x0.5x4) for pack of x4
   £1.20 + VAT  

   
   
  Exports of all parts supplied to outside EC Countries are exempt from UK VAT
  Exports to EC Countries are exempt from VAT if a valid VAT registration number is supplied
 
 

  Return To sp125racing.com Homepage
   
 

 
   
  SP125 Limited Disclaimer  
  Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
  As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or team
  whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all such claims,
  including damage to equipment and/or injury to personnel irrespective of how caused.
  All parts remain property of SP125 Limited until paid for in full.
  All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.