HONDA NSF250 NEW BODYWORK & AIRBOX PARTS 2024
Please 'Refresh' this page every time you visit. If it is slow to reload, you know then that this page has been updated since your last visit.
BATTLEFACTORY RAIN LIGHT
HONDA NSF250R Battlefactory Rain light (Cable Length 130cm) £115.00 + VAT
Connects directly to the Red Service Check Connector on the wire harness - no need to use a battery for power.
Supplied with rubber mounted Installation plate and bolts, for easy fixing to the seat unit.
Simply connect to the Red Service Check Connector on the wire harness during rain conditions and disconnect when dry conditions.
HONDA NSF250R Battlefactory Rain light (Cable Length 130cm) £115.00 + VAT
Connects directly to the Red Service Check Connector on the wire harness - no need to use a battery for power.
Supplied with rubber mounted Installation plate and bolts, for easy fixing to the seat unit.
Simply connect to the Red Service Check Connector on the wire harness during rain conditions and disconnect when dry conditions.
|
|
|
sp125racing Honda NSF250R STANDARD SCREEN £55.00 + VAT
sp125racing Honda NSF250R +30mm 'TALL' SCREEN £60.00 + VAT
sp125racing Honda NSF250R +30mm 'TALL' SCREEN £60.00 + VAT
|
|
Left Side is Standard Screen & Right Side is Tall Screen
|
SPEEDFIBER SCREEN RIVETS - Pack of 7 £6.00 + VAT
Speedfiber Screen Screw M4x10 & Nut M4 Black (Pack of 7) £6.00 + VAT
sp125racing Dzus Fasteners
sp125racing 6mm Diameter Fairing Dzus Fasteners - Pack of x6 £36.00 + VAT
AIRBOX FOAM
GENUINE TSR JAPANESE REPLACEMENT AIRBOX FOAM STRIPS £22.00 + VAT
Size: Length 2000mm x 20mm Wide x 10mm Thick
GENUINE TSR JAPANESE REPLACEMENT AIRBOX FOAM STRIPS £22.00 + VAT
Size: Length 2000mm x 20mm Wide x 10mm Thick
|
|
|
SPEED FIBER HONDA NSF250R PRE-PREG CARBON FRONT MUDGUARD
SPEED FIBER NSF250R Honda PRE-PREG CARBON FRONT WHEEL MUDGUARD £165.00 + VAT
Specifically made for the standard Honda NSF250R.
Made from Pre-Preg Carbon Fibre.
Strong & Very Light Weight - only 160g weight
SPEED FIBER NSF250R Honda PRE-PREG CARBON FRONT WHEEL MUDGUARD £165.00 + VAT
Specifically made for the standard Honda NSF250R.
Made from Pre-Preg Carbon Fibre.
Strong & Very Light Weight - only 160g weight
|
|
|
Battlefactory Rear Wheel Mudguard
Made from Fibreglass with Black Gel finish
Light Weight - only 200g £115.00 + VAT
Made from Fibreglass with Black Gel finish
Light Weight - only 200g £115.00 + VAT
SPEED FIBER HONDA NSF250R PRE-PREG CARBON REAR WHEEL MUDGUARD
SPEED FIBER NSF250R Honda PRE-PREG CARBON REAR WHEEL MUDGUARD £145.00 + VAT
Specifically made for the standard Honda NSF250R Swingarm.
Made from Pre-Preg Carbon Fibre.
Strong & Very Light Weight - only 130g weight
SPEED FIBER NSF250R Honda PRE-PREG CARBON REAR WHEEL MUDGUARD £145.00 + VAT
Specifically made for the standard Honda NSF250R Swingarm.
Made from Pre-Preg Carbon Fibre.
Strong & Very Light Weight - only 130g weight
|
|
SPEED FIBER NSF250R Honda PRE-PREG CARBON STEERING COVER £75.00 + VAT
|
|
BATTLEFACTORY CARBON SWINGARM GUARDS
Set of Battlefactory Carbon Swingarm Guards (Left & Right Sides)
Protects your Honda NSF250R Swingarm from potential crash damage
Made from Carbon Fibre with wet carbon finish.
Light Weight - only 116g total weight for both items £150.00+VAT
Set of Battlefactory Carbon Swingarm Guards (Left & Right Sides)
Protects your Honda NSF250R Swingarm from potential crash damage
Made from Carbon Fibre with wet carbon finish.
Light Weight - only 116g total weight for both items £150.00+VAT
|
|
|
HONDA NSF250R PRE-PREG CARBON SWINGARM PROTECTOR
SPEED FIBER NSF250R Honda PRE-PREG CARBON SWINGARM PROTECTORS PROTECTOR - LEFT & RIGHT SIDES £175.00 + VAT
Protects the standard NSF250R Swingarm from Crash Damage, or covers up previous crash damage.
Very High Quality, made from Pre-Preg Carbon Fibre outside & Carbon/Kevlar inside.
Strong & Very Light Weight - Total weight only 330g
SPEED FIBER NSF250R Honda PRE-PREG CARBON SWINGARM PROTECTORS PROTECTOR - LEFT & RIGHT SIDES £175.00 + VAT
Protects the standard NSF250R Swingarm from Crash Damage, or covers up previous crash damage.
Very High Quality, made from Pre-Preg Carbon Fibre outside & Carbon/Kevlar inside.
Strong & Very Light Weight - Total weight only 330g
|
|
SPEEDFIBER SELF ADHESIVE SEAT FOAM
12mm SPEEDFIBER SEAT FOAM - Pre cut and with self adhesive backing £12.50 + VAT
20mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £23.50 + VAT
30mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £28.50 + VAT
40mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £42.00 + VAT
12mm SPEEDFIBER SEAT FOAM - Pre cut and with self adhesive backing £12.50 + VAT
20mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £23.50 + VAT
30mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £28.50 + VAT
40mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £42.00 + VAT
|
|
|
|
12mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £6.00 + VAT
20mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £9.00 + VAT
30mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £12.00 + VAT
40mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £15.00 + VAT
|
|
|
|
PATTERN FAIRING MOUNTS
SpeedFiber RS125 Honda Standard Nylon Fairing Mount (White Colour), Fairing Screw & R-Clip (x1) £7.00 + VAT
SpeedFiber RS125 Honda Standard Nylon Fairing Mount (White Colour), Fairing Screw & R-Clip (Set of x5) £35.00 + VAT
SpeedFiber RS125 Honda Standard Nylon Fairing Mount (White Colour), Fairing Screw & R-Clip (Set of x5) £35.00 + VAT
Pattern NSF250R Honda Side Fairing Stay £9.50 + VAT each
SPEEDFIBER NSF250R Honda +30mm Extended Side Fairing Stay (Length 96mm) £13.50 + VAT each
|
|
Pattern NS250R Honda Top Fairing Stay £18.50 + VAT each
SPEEDFIBER NS250R Honda Top Fairing Stay £19.50 + VAT each
|
|
|
SPEEDFIBER NSF250R Honda Seat Mounting Aluminium Collar £4.00 + VAT each
SPEEDFIBER NSF250R Honda Seat Mounting Rubber Grommet £1.75 + VAT each
SPEEDFIBER NSF250R Honda Seat Mounting Rubber Grommet £1.75 + VAT each
|
|
Exports of all parts supplied outside of UK, to EU Countries, USA, Australia, South Africa, Asia etc are exempt from UK VAT and will be charged 0% VAT.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
SP125 Limited
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 [email protected] Mobile 07738 626165
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 [email protected] Mobile 07738 626165
SP125 Limited Disclaimer
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
