sp125racing
Follow us at
  • sp125racing
  • Honda RS125
    • RS125 Genuine Honda HRC Parts
    • RS125 Engine Parts
    • VHM Piston Height Tool Guide
    • RS125 Chassis Parts
    • RS125 Honda Wheels Tyrewarmers Sprockets
    • RS125 Honda Crash Protectors
    • RS125 Honda Brembo Brakes
    • RS125 Honda Handlebars Levers & Footpegs
    • RS125 Honda Stands
    • RS125 Honda Quickshifters
    • Battle Shifter Fitting Instructions
    • RS125 Special Tools
    • RS125 Honda Fairings
    • RS125 Honda Seats
    • RS125 Honda Mudguards
    • HRC Datalogger & Detonation Counters
    • Detonation Detection System
    • Replacement for HRC Detonation Lead
    • RS125 16 Setting Ignition Curve Changer
    • RS125 Ignition Pulse Simulator
    • RS125 Throttle Position Sensor Checker
    • RS125 Gear Change Light
    • RS125 Powerjet Controller
    • RS125 Powervalve Controller Box
    • RS125 High Viz Temp Gauge
    • RS125 Ni-MH Battery Pack
    • RS125 Honda How To Order
  • HRC Setting Data & Maintenance Information
    • RS125R / RS250 Basic Concept of Power Jets
    • RS125 / RS250 Settings using Detonation Counters
    • RS125 / RS250 Settings according to seasonal conditions
    • RS125R / RS250R Functions of carburetor parts
    • RS250R Carburetor Settings
    • RS125R Parts Combination according to model years
    • RS250R Parts Combination according to model years
    • RS125R / RS250R Optimizing riding position
    • RS125R / RS250R Suspension Settings vol.1
    • RS250R Suspension Directionality
    • RS125R / RS250R Points of engine and frame assembly
    • RS125R / RS250R Notes on Engine Maintenance
    • RS125R / RS250R Notes on Frame Maintenance
    • RS125R / RS250R Conservation for engine power
    • RS125R / RS250R Running In / Warming Up / Position Adjustment
  • Honda RS250
    • RS250 Genuine Honda HRC Parts
    • RS250 Engine Parts
    • RS250 Chassis Parts
    • RS250 Handlebars, Levers & Footpegs
    • RS250 Brakes
    • RS250 Honda Stands
    • RS250 Honda Quickshifters
    • RS250 Bodywork
    • RS250 Bike Specification 2008
    • RS250 16 Setting Ignition Curve Changer
    • RS250 Ignition Pulse Simulator
    • RS250 Honda How To Order
  • Honda NSF250R
    • NSF250R Genuine Honda HRC Parts
    • NSF250R Engine Parts
    • NSF250R Honda Wheels Tyrewarmers Sprockets
    • NSF250R Honda Handlebars Levers & Footpegs
    • NSF250R Chassis Parts
    • NSF250R Honda Crash Protectors
    • NSF250R Honda Stands
    • NSF250R Honda Quickshifter
    • NSF250R Bodywork & Airbox Parts
    • NSF250R Honda How To Order
    • NSF250R High Viz Temp Gauge
  • Nova Gearbox - KTM Moto3
  • Terms and Conditions
  • Steve Patrickson Profile
  • Race Team Archives
    • 2023 sp125racing Team
    • 2022 sp125racing Team
    • 2021 sp125racing Team
    • 2020 sp125racing Team
    • 2019 sp125racing Team
    • 2018 sp125racing Team
    • 2017 sp125racing Team
    • 2016 sp125racing Team
    • 2015 sp125racing Team
    • 2014 sp125racing Team
    • 2013 sp125racing Team
    • 2012 sp125racing Team
    • 2011 sp125racing Team
    • 2010 sp125racing Team
    • 2009 sp125racing Team
    • 2008 sp125racing Team
    • 2007 sp125racing Team
    • 2006 sp125racing Team
    • 2005 sp125racing Team
    • 2004 sp125racing Team
    • 2003 sp125racing Team
    • 2002 sp125racing Team
    • Tom Carne Profile
    • Jordan Weaving Profile
    • Rob Guiver Profile
    • Brad Ray Profile
    • Chrissy Rouse Profile
    • Matt Davies Profile
    • Ben Barrett Profile
    • Matthew Hoyle Profile
    • Lee Costello Profile
    • Nicole McAleer Profile
    • Connor Behan Profile
    • Luke Hinton Profile
    • Jordan Malton Profile
    • Dan Moreton Profile
    • Michael Smith Profile
    • Luke Jones Profile
    • Jamie Ashby Profile
    • Mark Clayton Profile
    • Joel Marklund Profile
    • Elliot Lodge Profile
    • Elliot Lodge 2018 Profile
    • Elliot Lodge 2019 Profile
    • Harvey Claridge 2018 Profile
    • Harvey Claridge 2019 Profile
    • Franco Bourne 2019 Profile
    • Calum Beach 2019 Profile
    • Jeremy Knight 2019 Profile
    • Cameron Horsman 2019 Profile
  • Contact
  • 2022 Race Dates
  • 2023 Race Dates

HONDA RS250 NEW HANDLEBARS, LEVERS & FOOTPEGS


Please  'Refresh' this page every time you visit.         If it is slow to reload, you know then that this page has been updated since your last visit.


HONDA RS250 HANDLEBARS

1988~2008 RS250 HONDA BATTLE FACTORY ALUMINIUM HANDLEBAR - with nylon end cap              £16.50 + VAT each
1988~2008 RS250 HONDA BATTLE FACTORY  HANDLEBAR END CAP                                                £3.00 + VAT each
Picture
Picture
Picture

​RENTHAL HANDLEBAR GRIPS
Road Race Full Diamond Handlebar Grips        £12.00 + Vat per pair (x2 Grips)
'Soft' Light Grey G147
'Medium' Grey G148
'Firm' Dark Grey G149
Picture

HONDA RS250 BREMBO BRAKE LEVERS

BREMBO BRAKE LEVER - Standard 250 length              £45.00 + VAT     
BREMBO BRAKE LEVER - Short 125 length                   £45.00 + VAT

Picture


Top: Brembo Short 18 Front Brake Lever 


Bottom: Brembo Standard Front Brake Lever 

BREMBO 'FOLDING' BILLET BRAKE LEVER - Short 18 length                     £73.00 + VAT
BREMBO 'FOLDING' BILLET BRAKE LEVER - Standard 250 length              £73.00 + VAT
Picture

HONDA RS250 FRONT BRAKE LEVER PROTECTOR

​1995/2004 RS125 Honda FRONT BRAKE LEVER PROTECTOR - RIGHT SIDE ONLY - GB RACING            £51.50 + VAT

GB Racing Front Brake Lever Guard : For 16~17mm Internal Handlebar Tube Diameter
  • Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon 
  • PATENT # GB2479405 for Improved Composition
Fits perfectly to the Battlefactory Handlebars or any Handlebar with 16~17mm Internal Tube Diameter
Picture
Picture
Picture

HONDA RS250 CLUTCH LEVERS

1988~1999 NX5 RS250 HONDA PATTERN CLUTCH LEVER                      £22.50 + VAT
2000~2008 NXA RS250 HONDA GENUINE HONDA CLUTCH LEVER  -  Discontinued - Sold Out
Picture

HONDA RS250 FOOTPEGS HANGERS, FOOTPEGS, GEAR & REAR BRAKE LEVERS

1990~2008 RS250 NX5 & NXA HONDA RCD GP PATTERN FOOTPEG (Threaded fixing) with Nylon End Cap       £21.00 + VAT each

Machine Cut Grooves, giving superior grip over conventional knurled finished footpegs.
Fitted with End Cap.
Machined 19mm slot for easy installation / removal using a 19mm spanner.

8mm Threaded Mounting.
Total Length including End Cap : 80mm  /  Centre Outside Diameter : 24mm  /  End Outside Diameter : 26mm
Picture
Picture
Picture
Picture

​1990~2008 RS250 NX5 & NXA HONDA BATTLE FACTORY FOOTPEG (Threaded fixing) with Nylon End Cap & Stud for GP Bearing Lever   £22.50 + VAT each
Picture
Picture

HONDA RS250 FOOTREST HANGERS - No Longer Available - Sold Out

1993~2000 RS250 NX5 HONDA PATTERN FOOTREST PLATES - Stronger & Lighter Than Standard        Discontinued - Sold Out
2001~2008 RS250 NXA HONDA PATTERN FOOTREST PLATES - Stronger & Lighter Than Standard        Discontinued - Sold Out
Picture
1993~2000 RS250 NX5 HONDA BATTLEFACTORY FOOTREST HANGER - Footpeg Position Standard        Discontinued - Sold Out
2001~2008 RS250 NXA HONDA BATTLEFACTORY FOOTREST HANGER - Footpeg Position Standard        Discontinued - Sold Out
Picture
Picture

HONDA RS250 GEAR & REAR BRAKE LEVERS

1990~2008 RS250 HONDA BATTLE FACTORY G.P. SPEC BEARING TYPE REAR BRAKE LEVER - Increased Leverage & No Side Play        £84.50 + VAT
Picture
Picture
1993~2000 RS250 NX5 HONDA BATTLE FACTORY G.P. SPEC BEARING TYPE GEAR LEVER - No Side Play             £84.50 + VAT
Picture
Picture
2001~2008 RS250 NXA HONDA BATTLE FACTORY G.P. SPEC BEARING TYPE GEAR LEVER - No Side Play             £84.50 + VAT
Picture
Picture
1993~2000 RS250 NX5 HONDA BATTLE FACTORY G.P. SPEC BEARING TYPE GEAR LEVER - Increased Leverage & No Side Play                 £84.50 + VAT
         For use together with the 1993~2000 Battle Factory RS250 NX5 Quickshifter - this is the Honda RS125 Gear Lever which mounts to the footpeg.
Picture
Picture

BATTLE FACTORY LEVER REPLACEMENT PARTS

1993~2008 BATTLE FACTORY Replacement Lever End              £21.00 + VAT
Picture
1993~2008 BATTLE FACTORY Replacement Lever Bearing (x2 in each lever)              £12.00 + VAT each
Picture
1993~2008 BATTLE FACTORY Replacement Lever Aluminium Collar (28x2.5x2) for pack of x2              £5.75 + VAT
Picture
1993~2008 BATTLE FACTORY Replacement Lever Shim Washer (8x0.5x4) for pack of x4               £1.20 + VAT
Picture
Picture

Exports of all parts supplied outside of UK, to EU Countries, USA, Australia, South Africa, Asia etc are exempt from UK VAT and will be charged 0% VAT.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
​Payment of all Import tax, customs & duties charges are the responsibility of the customer.

return to honda rs250
home
SP125 Limited
22 Walker Wood,  Baildon,  Shipley,  West Yorkshire,  BD17 5BE,  England
Telephone 01274 583231      steve@sp125racing.com      Mobile 07738 626165
Picture
SP125 Limited Disclaimer
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or 
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all 
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.

All parts remain property of SP125 Limited until paid for in full.

All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
Powered by Create your own unique website with customizable templates.