HONDA RS250 NEW BRAKES & BRAKE PADS
Please 'Refresh' this page every time you visit. If it is slow to reload, you know then that this page has been updated since your last visit.
HONDA RS250 REAR BRAKE PADS
1994~2008 Honda RS250 EBC STANDARD REAR BRAKE PADS (Pair) £19.50 + VAT
|
|
|
BREMBO BRAKES
|
|
|
BREMBO 19x18 RADIAL FRONT BRAKE MASTERCYLINDER - including Brake Lever - 19mm bore, 18-ratio lever, 286g £230.00 + VAT
The 19x18 is the most commonly used, as it gives more feel, especially when trailing the brakes into the corners.
BREMBO 19x20 RADIAL FRONT BRAKE MASTERCYLINDER - including Brake Lever - 19mm bore, 20-ratio lever, 286g £230.00 + VAT
Some riders prefer the 19x20 which has a firmer lever feel.
The difference between the two is the stroke, the distance from the pivot pin to the barrel nut in the lever, either being 18mm or 20mm.
The 19x18 is the most commonly used, as it gives more feel, especially when trailing the brakes into the corners.
BREMBO 19x20 RADIAL FRONT BRAKE MASTERCYLINDER - including Brake Lever - 19mm bore, 20-ratio lever, 286g £230.00 + VAT
Some riders prefer the 19x20 which has a firmer lever feel.
The difference between the two is the stroke, the distance from the pivot pin to the barrel nut in the lever, either being 18mm or 20mm.
BREMBO FRONT BRAKE MASTERCYLINDER REPAIR KIT £47.50
Genuine Brembo Mastercylinder repair kit - to repair damaged push rod and crush washer
Genuine Brembo Mastercylinder repair kit - to repair damaged push rod and crush washer
BREMBO FRONT BRAKE LEVERS
Brembo 'Short' 18 Front Brake Lever £45.00 + VAT
Brembo 'Standard' Front Brake Lever £45.00 + VAT
Brembo 'Standard' Front Brake Lever £45.00 + VAT
BREMBO 'FOLDING' BILLET BRAKE LEVER - Short 18 length £73.00 + VAT
BREMBO 'FOLDING' BILLET BRAKE LEVER - Standard 250 length £73.00 + VAT
BREMBO 'FOLDING' BILLET BRAKE LEVER - Standard 250 length £73.00 + VAT
BREMBO BRAKE FLUID
Brembo LCF600 DOT4 BRAKE FLUID (500ml) £25.00 + VAT
HONDA RS250 BREMBO FRONT BRAKE CALIPERS
BREMBO 20.4756.52/62 BILLET 2-PIECE FRONT BRAKE CALIPER - for use only with standard 297mm front brake disc
2-Piece Body Machined from Solid Aluminium, with 30/34 Aluminium 4 Piston, with Racing Spec Seals & Quick Release Pad Pin.
40mm mounting hole centres. Weight 780g £525.00 + VAT
BREMBO 20.4756.52/62 BILLET 2-PIECE FRONT BRAKE CALIPER - for use only with standard 297mm front brake disc
2-Piece Body Machined from Solid Aluminium, with 30/34 Aluminium 4 Piston, with Racing Spec Seals & Quick Release Pad Pin.
40mm mounting hole centres. Weight 780g £525.00 + VAT
Exports of all parts supplied outside of UK, to EU Countries, USA, Australia, South Africa, Asia etc are exempt from UK VAT and will be charged 0% VAT.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
SP125 Limited
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 [email protected] Mobile 07738 626165
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 [email protected] Mobile 07738 626165
SP125 Limited Disclaimer
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
