HONDA NSF250 NEW CHASSIS PARTS 2024
Please 'Refresh' this page every time you visit. If it is slow to reload, you know then that this page has been updated since your last visit.
BATTLEFACTORY RAIN LIGHT
HONDA NSF250R Battlefactory Rain light (Cable Length 130cm) £115.00 + VAT
Connects directly to the Red Service Check Connector on the wire harness - no need to use a battery for power.
Supplied with rubber mounted Installation plate and bolts, for easy fixing to the seat unit.
Simply connect to the Red Service Check Connector on the wire harness during rain conditions and disconnect when dry conditions.
HONDA NSF250R Battlefactory Rain light (Cable Length 130cm) £115.00 + VAT
Connects directly to the Red Service Check Connector on the wire harness - no need to use a battery for power.
Supplied with rubber mounted Installation plate and bolts, for easy fixing to the seat unit.
Simply connect to the Red Service Check Connector on the wire harness during rain conditions and disconnect when dry conditions.
|
|
|
BATTLEFACTORY CARBON SWINGARM GUARDS
Set of HONDA NSF250R Carbon Swingarm Guards (Left & Right Sides)
Protects your Honda NSF250R Swingarm from potential crash damage
Made from Carbon Fibre with wet carbon finish.
Light Weight - only 116g total weight for both items £150.00+VAT
Set of HONDA NSF250R Carbon Swingarm Guards (Left & Right Sides)
Protects your Honda NSF250R Swingarm from potential crash damage
Made from Carbon Fibre with wet carbon finish.
Light Weight - only 116g total weight for both items £150.00+VAT
|
|
|
SPEEDFIBER KILL SWITCH GUARD
Speedfiber Honda NSF250R Kill Switch Guard £18.00+VAT
Attach to the standard Kill Switch to prevent accidentally hitting the kill switch whilst riding.
Necessary to attach to kill switch by using glue.
Speedfiber Honda NSF250R Kill Switch Guard £18.00+VAT
Attach to the standard Kill Switch to prevent accidentally hitting the kill switch whilst riding.
Necessary to attach to kill switch by using glue.
|
|
|
|
SPEEDFIBER RAIN LIGHT
HONDA NSF250R SpeedFiber Rain light (Cable Length 50cm) £29.50 + VAT
Requires 12v Power Supply
HONDA NSF250R SpeedFiber Rain light (Cable Length 50cm) £29.50 + VAT
Requires 12v Power Supply
|
|
|
HONDA NSF250R FUEL TANK DRAIN SPOUT TOOL
This tool makes it easy to drain fuel from the fuel tank £70.00 + VAT
This tool makes it easy to drain fuel from the fuel tank £70.00 + VAT
|
|
|
|
|
|
HONDA NSF250R SILENCER REPAIR
Battle Factory HONDA NSF250R SILENCER OUTER BODY £165.00 + VAT
Replaces the original Honda Silencer Outer Body, which is not possible to buy from Honda.
Manufactured from high quality SUS 304 Stainless Steel.
Battle Factory HONDA NSF250R SILENCER OUTER BODY £165.00 + VAT
Replaces the original Honda Silencer Outer Body, which is not possible to buy from Honda.
Manufactured from high quality SUS 304 Stainless Steel.
|
|
|
Battle Factory HONDA NSF250R GLASS WOOL & RIVET SET £77.50 + VAT
Cheaper alternative to the original Honda Silencer Packing.
Cheaper alternative to the original Honda Silencer Packing.
CPC QUICK RELEASE FUEL LINE COUPLING KIT
NSF250R Honda CPC Quick Release Fuel Line Coupling Kit £47.50 + VAT
NSF250R Honda CPC Quick Release Fuel Line Coupling Kit £47.50 + VAT
|
|
|
SPEEDFIBER SELF ADHESIVE SEAT FOAM
12mm SPEEDFIBER SEAT FOAM - Pre cut and with self adhesive backing £12.50 + VAT
20mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £23.50 + VAT
30mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £28.50 + VAT
40mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £42.00 + VAT
12mm SPEEDFIBER SEAT FOAM - Pre cut and with self adhesive backing £12.50 + VAT
20mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £23.50 + VAT
30mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £28.50 + VAT
40mm SPEEDFIBER SEAT FOAM - Pre cut and shaped at the edges with self adhesive backing £42.00 + VAT
|
|
|
|
12mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £6.00 + VAT
20mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £9.00 + VAT
30mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £12.00 + VAT
40mm SPEEDFIBER 'BACK' SEAT FOAM - Pre cut and with self adhesive backing £15.00 + VAT
|
|
|
|
Swingarm Castle Nut Tool - Honda RS125 / NSF250R £40.00 + VAT
Replaces LOCK NUT WRENCH PVT.ADJUST
Honda Tool Part Number 07908-4690003
Replaces LOCK NUT WRENCH PVT.ADJUST
Honda Tool Part Number 07908-4690003
|
|
HONDA NSF250R FRONT FAIRING BRACKET / CLOCK MOUNT STAY
NSF250R Honda 2019/2024 Pattern Front Fairing Bracket / Clock Mount Stay £150.00 + VAT
Quality pattern replacement for the Honda NSF250R 2019~2024 Honda Part Number 50810-NX7-010 STAY COMP., FR. CTR. COWL
* This Pattern Front Fairing Bracket / Clock Mount Stay does not have the bracket for the Rev Counter Display - but the original bracket can be used from your own Fairing Bracket *
NSF250R Honda 2019/2024 Pattern Front Fairing Bracket / Clock Mount Stay £150.00 + VAT
Quality pattern replacement for the Honda NSF250R 2019~2024 Honda Part Number 50810-NX7-010 STAY COMP., FR. CTR. COWL
* This Pattern Front Fairing Bracket / Clock Mount Stay does not have the bracket for the Rev Counter Display - but the original bracket can be used from your own Fairing Bracket *
|
|
|
NSF250R Honda 2019/2024 SPEEDFIBER Front Fairing Bracket / Clock Mount Stay £185.00 + VAT
Quality pattern replacement for the Honda NSF250R 2019~2024 Honda Part Number 50810-NX7-010 STAY COMP., FR. CTR. COWL
|
|
HONDA NSF250R SEAT SUB-FRAMES
NSF250R Honda PATTERN ALLOY SEAT SUB-FRAME £125.00 + VAT
NSF250R Honda PATTERN ALLOY EXTENDED SEAT SUB-FRAME +40mm extended further back £145.00 + VAT
NSF250R Honda PATTERN ALLOY EXTENDED SEAT SUB-FRAME +40mm extended further back / +25mm Raised £195.00 + VAT
Includes 2x Brackets to attach the front of the Seat to the Chassis mountings.
|
|
|
PATTERN FAIRING MOUNTS
SpeedFiber RS125 Honda Standard Nylon Fairing Mount (White Colour), Fairing Screw & R-Clip (x1) £7.00 + VAT
SpeedFiber RS125 Honda Standard Nylon Fairing Mount (White Colour), Fairing Screw & R-Clip (Set of x5) £35.00 + VAT
SpeedFiber RS125 Honda Standard Nylon Fairing Mount (White Colour), Fairing Screw & R-Clip (Set of x5) £35.00 + VAT
Pattern NSF250R Honda Side Fairing Stay £9.50 + VAT each
SPEEDFIBER NSF250R Honda +30mm Extended Side Fairing Stay (Length 96mm) £13.50 + VAT each
|
|
Pattern NSF250R Honda Top Fairing Stay £18.50 + VAT each
SPEEDFIBER NSF250R Honda Top Fairing Stay £19.50 + VAT each
|
|
|
SPEEDFIBER NSF250R Honda Screen Screw & Nut (Black) M4x10mm - Pack of x7 Screws & Nuts £6.00 + VAT
SPEEDFIBER NSF250R Honda Seat Mounting Aluminium Collar £4.00 + VAT each
SPEEDFIBER NSF250R Honda Seat Mounting Rubber Grommet £1.75 + VAT each
SPEEDFIBER NSF250R Honda Seat Mounting Rubber Grommet £1.75 + VAT each
|
|
SPEEDFIBER NSF250R Honda Swingarm / Rear Stand Bobbins £22.00 + VAT
2x Aluminium Swing Arm Bobbins for using with a rear wheel stand. Supplied together with 2x 8mm bolts.
2x Aluminium Swing Arm Bobbins for using with a rear wheel stand. Supplied together with 2x 8mm bolts.
|
|
AIRBOX FOAM
GENUINE TSR JAPANESE REPLACEMENT AIRBOX FOAM STRIPS £25.00 + VAT
Size: Length 2000mm x 20mm Wide x 10mm Thick
Size: Length 2000mm x 20mm Wide x 10mm Thick
|
|
|
sp125racing REPLACEMENT AIRBOX FOAM STRIPS - UK made Foam £17.50 + VAT
Size: Length 2000mm x 20mm Wide x 13mm Thick
Size: Length 2000mm x 20mm Wide x 13mm Thick
Exports of all parts supplied outside of UK, to EU Countries, USA, Australia, South Africa, Asia etc are exempt from UK VAT and will be charged 0% VAT.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
SP125 Limited
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 [email protected] Mobile 07738 626165
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 [email protected] Mobile 07738 626165
SP125 Limited Disclaimer
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
