HONDA RS125 NEW WHEELS, BEARINGS, TYREWARMERS & SPROCKETS 2022
Please 'Refresh' this page every time you visit. If it is slow to reload, you know then that this page has been updated since your last visit.
HONDA RS125 MORIWAKI SPROCKET CUSH DRIVE RUBBERS
SET of x3 Moriwaki REINFORCED WHEEL DAMPER RUBBERS £58.50 + VAT
These are the standard Moriwaki MD250H sprocket cush drive rubbers, which can also be used in the Honda RS125 1990 till 2004 & Honda Moto3 NSF250R 2012> Race Bike.
The rubbers are manufactured in Japan, High Quality and cheaper than the Moto3 Honda NSF250R Rear Wheel Damper Rubbers.
SET of x3 Moriwaki REINFORCED WHEEL DAMPER RUBBERS £58.50 + VAT
These are the standard Moriwaki MD250H sprocket cush drive rubbers, which can also be used in the Honda RS125 1990 till 2004 & Honda Moto3 NSF250R 2012> Race Bike.
The rubbers are manufactured in Japan, High Quality and cheaper than the Moto3 Honda NSF250R Rear Wheel Damper Rubbers.
|
|
|
HONDA RS125 OZ 5-SPOKE FORGED ALUMINIUM WHEELS
OZ forged aluminum 5 - spoke wheels
Rim Size: Front: 2,50x17 / Rear: 3,50x17.
Weight: Front Wheel 2.36kg / Rear Wheel 3.15kg (without brake discs or sprocket carrier fitted)
Axle Size: Standard 15mm
Colour: Black. £1,400.00 + VAT
Rim Size: Front: 2,50x17 / Rear: 3,50x17.
Weight: Front Wheel 2.36kg / Rear Wheel 3.15kg (without brake discs or sprocket carrier fitted)
Axle Size: Standard 15mm
Colour: Black. £1,400.00 + VAT
Oz Front Wheel Pictures below.
|
|
|
|
Oz Rear Wheel Pictures Below
|
|
|
|
Supplied with OZ rear wheel Sprocket Carrier - which is made for using together with standard Honda NSF250R Sprockets.
To use your RS125 or Talon Sprockets on the OZ rear wheel Sprocket Carrier, it is necessary to make a small modification to the RS125 or Talon Sprocket.
The 3x bolt hole offset for the standard Honda Moto3 NSF250R & Oz sprocket carrier is slightly different, by 1mm, but it is easy to modify the RS125 or Talon sprocket with a small round file, or open the holes in the Talon Sprocket by 1mm.
Can Also be used together with Honda RS125 Talon GP Rear Sprocket Carrier & Honda RS125 or Talon Sprockets.
To use your RS125 or Talon Sprockets on the OZ rear wheel Sprocket Carrier, it is necessary to make a small modification to the RS125 or Talon Sprocket.
The 3x bolt hole offset for the standard Honda Moto3 NSF250R & Oz sprocket carrier is slightly different, by 1mm, but it is easy to modify the RS125 or Talon sprocket with a small round file, or open the holes in the Talon Sprocket by 1mm.
Can Also be used together with Honda RS125 Talon GP Rear Sprocket Carrier & Honda RS125 or Talon Sprockets.
|
|
|
|
HONDA RS125 MARCHESINI WHEEL REPLECEMENT HUBS
1995~2004 REPLACEMENT MARCHESINI BRAKE DISC CARRIER HUB
£150.00 + VAT
£150.00 + VAT
HONDA RS125 LOW FRICTION WHEEL BEARINGS
LOW FRICTION WHEEL BEARING - To fit standard Honda wheel bearing size & Larger Marvic Front Wheel bearing
LOW FRICTION STANDARD HONDA / REAR MARVIC & MARCHESINI 6202 BEARINGS ( OD 35 x ID 15 x W 11mm ) £9.00 + VAT
LOW FRICTION FRONT MARVIC 6004 BEARINGS (Right Side) ( OD 42 x ID 20 x W 12mm ) £9.50 + VAT
LOW FRICTION FRONT MARVIC 6302 BEARINGS (Left Side) ( OD 42 x ID 15 x W 13mm ) £10.25 + VAT
LOW FRICTION FRONT MARCHESINI 6203 BEARINGS (Right Side) ( OD 40 x ID 17 x W 12mm ) £9.50 + VAT
LOW FRICTION FRONT MARCHESINI 6202 BEARINGS (Left Side) ( OD 35 x ID 15 x W 11mm ) £10.25 + VAT
LOW FRICTION STANDARD HONDA / REAR MARVIC & MARCHESINI 6202 BEARINGS ( OD 35 x ID 15 x W 11mm ) £9.00 + VAT
LOW FRICTION FRONT MARVIC 6004 BEARINGS (Right Side) ( OD 42 x ID 20 x W 12mm ) £9.50 + VAT
LOW FRICTION FRONT MARVIC 6302 BEARINGS (Left Side) ( OD 42 x ID 15 x W 13mm ) £10.25 + VAT
LOW FRICTION FRONT MARCHESINI 6203 BEARINGS (Right Side) ( OD 40 x ID 17 x W 12mm ) £9.50 + VAT
LOW FRICTION FRONT MARCHESINI 6202 BEARINGS (Left Side) ( OD 35 x ID 15 x W 11mm ) £10.25 + VAT
LOW FRICTION SPROCKET CARRIER BEARING £13.75 + VAT
HONDA RS125 REAR BRAKE DISCS
EBC PATTERN REAR BRAKE DISC - Copy of original Honda Rear Brake Disc 43122-NF5-760 (Weight 530g) Ø186mm X 4.0mm thick £79.00 + VAT
|
|
|
STAINLESS STEEL LIGHTWEIGHT REAR BRAKE DISC (Weight 340g) Ø185mm X 3.5mm thick £85.00 + VAT
STAINLESS STEEL LIGHTWEIGHT REAR BRAKE DISC (Weight 340g) Ø185mm X 3.5mm thick £85.00 + VAT
|
|
|
STAINLESS STEEL REAR SPROCKET WASHER £15.00 + VAT
Replaces the Original Honda Rear Sprocket Washer 42616-NF4-000 - which is now discontinued and sold out by Honda
Made from 0.50mm Stainless Steel.
Replaces the Original Honda Rear Sprocket Washer 42616-NF4-000 - which is now discontinued and sold out by Honda
Made from 0.50mm Stainless Steel.
|
|
|
RS125 HONDA GP SPROCKET CARRIERS
1995/2004> TALON G.P. SPROCKET CARRIER - Better Chain & Cush Drive Life £72.00 + VAT
Direct Replacement for the Genuine Honda Sprocket Carrier Assy.
To be used together with Talon Gold and the new Talon Titan 415 Sprockets.
Direct Replacement for the Genuine Honda Sprocket Carrier Assy.
To be used together with Talon Gold and the new Talon Titan 415 Sprockets.
|
|
|
RS125 HONDA FRONT SPROCKETS
TALON 16T FRONT SPROCKETS (only 16T is available now from Talon) £22.50 + VAT
AFAM FRONT SPROCKETS (14T, 15T, 16T, 17T) £22.50 + VAT
RS125 HONDA REAR SPROCKETS
TALON GOLD RS125 HONDA 1990~2004> REAR SPROCKETS (35T~46T) £42.00 + VAT
RS125 HONDA TALON TITAN REAR SPROCKETS
TALON TITAN RS125 HONDA 1990~2004> REAR SPROCKETS (35T~44T) £42.00 + VAT
The New Talon Titan Sprocket is designed with 2 different bolt hole configurations.
Allowing the sprocket to be used on both the original Honda RS125 Sprocket Carrier, the Talon GP Sprocket Carrier plus the NSF250R and OZ Sprocket Carriers.
TALON TITAN RS125 HONDA 1990~2004> REAR SPROCKETS (35T~44T) £42.00 + VAT
The New Talon Titan Sprocket is designed with 2 different bolt hole configurations.
Allowing the sprocket to be used on both the original Honda RS125 Sprocket Carrier, the Talon GP Sprocket Carrier plus the NSF250R and OZ Sprocket Carriers.
|
|
RS125 HONDA CHAINS
DID 415ERZ (130 link) RACING CHAIN £62.00 + VAT
|
|
DID 415ERZ RACING CHAIN REPLACEMENT SPLIT LINK £3.00 + VAT
Exports of all parts supplied outside of UK, to EU Countries, USA, Australia, South Africa, Asia etc are exempt from UK VAT and will be charged 0% VAT.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
On arrival to your destination country, you may be asked to pay additional duties and taxes by customs, before the shipment is delivered.
Import tax, customs & duties regulations vary from country to country.
Payment of all Import tax, customs & duties charges are the responsibility of the customer.
SP125 Limited
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 steve@sp125racing.com Mobile 07738 626165
22 Walker Wood, Baildon, Shipley, West Yorkshire, BD17 5BE, England
Telephone 01274 583231 steve@sp125racing.com Mobile 07738 626165
SP125 Limited Disclaimer
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
Honda, HRC and all other parts supplied by the SP125 Limited are not guaranteed when used in competition events.
As such, it is a condition of our making all parts available that it is solely the decision of each individual, rider, team member or
team whether they choose to use any part supplied and in doing so, absolve the manufacturer and SP125 Limited of any or all
such claims, including damage to equipment and/or injury to personnel irrespective of how caused.
All parts remain property of SP125 Limited until paid for in full.
All 'special order' parts, that are ordered specially under the instruction of the customer, are non returnable and non refundable.
